Arm System

Before you can arm your system, all the zones must be closed. If some zones are currently open the keypad will display "Open", and the ready light will be off. To see the numbers of the open zone, press #. Go to the open zones and close all doors and windows, and make sure no one is present in zones with motion detectors. Once the Ready light is ON, the system is ready for arming. The system can not be armed unless the green Ready light is ON.

To arm your system (Away): enter [access code], leave through entry/exit door OR press Away buttom (3 to 4 seconds) until the Red armed light is on

To arm your system (Stay): enter [access code], and do not exit premises OR press Stay buttom (3 to 4 seconds) until the Red armed light is on. Note motion sensors will be disable in this mode.